PROFIBUS OLM/G11 V4.0 |
|
PB OLM/G11 V4.0 OPTICAL LINK MODULE W. 1 RS485 AND 1 GLASS-FOC-INTERFACE (2 BFOC-SOCKETS); WITH SIGNAL. CONTACT AND MEASURING OUTPUT, |
Transmission rate |
Transfer rate / with PROFIBUS |
9.6 kbit/s ... 12 Mbit/s |
Transfer rate / with PROFIBUS PA |
45.45 kbit/s |
Interfaces |
Number of electrical/optical connections / for network components or terminal equipment / maximum |
2 |
Number of electrical connections |
|
● for network components or terminal equipment |
1 |
● for measuring device |
1 |
● for signaling contact |
1 |
● for power supply |
1 |
● for redundant voltage supply |
1 |
Type of electrical connection |
|
● for network components or terminal equipment |
9-pin Sub-D socket |
● for measuring device |
2-pole terminal block |
● for power supply and signaling contact |
5-pole terminal block |
Number of optical interfaces / for fiber optic cable |
1 |
Design of the optical interface / for fiber optic cable |
BFOC port |
Optical data |
Damping ratio / of the FOC transmission link |
|
● for glass FOC with 50/125 µm / at 3 dB/km / maximum |
10 dB |
● for glass FOC with 62.5/125 µm / at 3.5 dB/km / maximum |
12 dB |
propagation delay [bit] |
6.5 bit |
Connectable optical power relative to 1 mW |
|
● for glass FOC with 50/125 µm / at 3 dB/km |
-16 dB |
● for glass FOC with 62.5/125 µm / at 3.5 dB/km |
-13 dB |
Optical sensitivity relating to 1 mW |
|
● for glass FOC with 50/125 µm / at 3 dB/km |
-28 dB |
● for glass FOC with 62.5/125 µm / at 3.5 dB/km |
-28 dB |
Wavelength |
|
● for glass FOC with 50/125 µm / compatible with interface / at 3 dB/km |
860 nm |
● for glass FOC with 62.5/125 µm / compatible with interface / at 3.5 dB/km |
860 nm |
Wire length |
|
● for glass FOC with 50/125 µm / at 3 dB/km / maximum |
3 km |
● for glass FOC with 62.5/125 µm / at 3.5 dB/km / maximum |
3 km |