6ES7153-2BA10-0XB0

ET200M, INTERFACE IM153-2 HF

SIMATIC DP, ET 200M INTERFACE IM 153-2 HIGH FEATURE FOR MAX. 12 S7-300 MODULES, WITH REDUNDANCY, TIME STAMPING FIT FOR ISOCHRONE MODE NEW FEATURES: 12 MODULES / STATION SLAVE INITIATIVE FOR SWITCHES AND DRIVE ES EXTENDED DATA FOR HART SECON- DARY VARIABLES OPERATON WITH 64PT MODULES EXTENDES TIMESTAMPS WITH 32 SIGNALS / SLOT +++ SEE COMPATIBILITY NOTES IN IN THE MANUAL +++

General information
Vendor identification (VendorID)		801Eh
Supply voltage
Rated value (DC)		24 V
● 24 V DC		Yes
permissible range, lower limit (DC)		20.4 V
permissible range, upper limit (DC)		28.8 V
permissible range (ripple included), lower limit (DC)		20.4 V
permissible range (ripple included), upper limit (DC)		28.8 V
external protection for power supply lines (recommendation)		2,5 A
Mains buffering
● Mains/voltage failure stored energy time		5 ms
Input current
Current consumption, max.		650 mA; with 24 V DC supply
Inrush current, typ.		3 A
I²t		0.1 A²·s
Output current
for backplane bus (5 V DC), max.		1.5 A
Power loss
Power loss, typ.		5.5 W
Address area
Addressing volume
● Inputs		244 byte
● Outputs		244 byte
Hardware configuration
Number of modules per DP slave interface, max.		12
Time stamping
Accuracy		1 ms; 1ms at up to 8 modules; 10ms at up to 12 modules
Number of message buffers		15
Messages per message buffer		20
Number of stampable digital inputs, max.		128; Max. 128 signals/station; max. 32 signals/slot
Time format		RFC 1119
Time resolution		0.466 ns
Time interval for transmitting the message buffer if a message is present		1 000 ms
Time stamp on signal change		rising / falling edge as signal entering or exiting

Yorum Yap

Adınız:


Yorumunuz: Not: HTML'ye dönüştürülmez!

Oylama: Kötü           İyi

Doğrulama kodunu giriniz: