6ES7151-7AA21-0AB0

ET200S, IM151-7 CPU INTERFACE, 128KB

SIMATIC DP, IM151-7 CPU FOR ET200S, 128 KB WORKING MEMORY INTEGR. PROFIBUS DP INTERFACE (9 PIN SUB-D, FEMALE) AS DP SLAVE, W/O BATTERY SIMATIC MMC REQUIRED
General information
Hardware product version		01
Firmware version		V3.3
Engineering with
● Programming package		V5.5 + SP1 or higher or V5.2 + SP1 or higher + HSP 219
Supply voltage
Rated value (DC)		24 V
permissible range, lower limit (DC)		19.2 V
permissible range, upper limit (DC)		28.8 V
Reverse polarity protection		Yes; against destruction
external protection for power supply lines (recommendation)		2 A min.
Mains buffering
● Mains/voltage failure stored energy time		5 ms
Input current
Inrush current, max.		1.8 A; Typical
I²t		0.09 A²·s
from supply voltage 1L+, max.		320 mA; 410 mA with DP master module
Output current
for backplane bus (5 V DC), max.		700 mA
Power loss
Power loss, typ.		4.2 W
Memory
Work memory
● integrated		128 kbyte
● expandable		No
● Size of retentive memory for retentive data blocks		64 kbyte
Load memory
● Plug-in (MMC)		Yes
● Plug-in (MMC), max.		8 Mbyte
● Data management on MMC (after last programming), min.		10 y
Backup
● present		Yes; Ensured by SIMATIC Micro Memory Card (maintenance-free)
CPU processing times
for bit operations, typ.		0.06 µs
for word operations, typ.		0.12 µs
for fixed point arithmetic, typ.		0.16 µs
for floating point arithmetic, typ.		0.59 µs

Yorum Yap

Adınız:


Yorumunuz: Not: HTML'ye dönüştürülmez!

Oylama: Kötü           İyi

Doğrulama kodunu giriniz: