331-1KF01 - VIPA
331-1KF01 - Signal modules analog | Analog input modules
Order no. |
331-1KF01 |
| Type | SM 331 |
General information |
|
| Note | - |
| Features | 8x AI 13 Bit Voltage +/- 10 V, +/- 50 mV, +/- 500 mV, +/- 5 V, 0 V ... +10 V Strom +/- 20 mA, 0/4...20 mA Resistance thermometer For 40 pole front connector |
| SPEED-Bus | - |
Current consumption/power loss |
|
| Current consumption from backplane bus | 255 mA |
| Power loss | 1.3 W |
Technical data analog inputs |
|
| Number of inputs | 8 |
| Cable length, shielded | 50 m |
| Rated load voltage | - |
| Current consumption from load voltage L+ (without load) | - |
| Voltage inputs |  |
| Min. input resistance (voltage range) | 100 kΩ |
| Input voltage ranges | -50 mV ... +50 mV -500 mV ... +500 mV -1 V ... +1 V -5 V ... +5 V 0 V ... +10 V -10 V ... +10 V +1 V ... +5 V |
| Operational limit of voltage ranges | +/-0.5% ... +/-0.6% |
| Operational limit of voltage ranges with SFU | - |
| Basic error limit voltage ranges | +/-0.3% ... +/-0.4% |
| Basic error limit voltage ranges with SFU | - |
| Destruction limit voltage | max. 30V |
| Current inputs | |
| Max. input resistance (current range) | 100 Ω |
| Input current ranges | -20 mA ... +20 mA 0 mA ... +20 mA +4 mA ... +20 mA |
| Operational limit of current ranges | +/-0.5% |
| Operational limit of current ranges with SFU | - |
| Grundfehlergrenze Strombereiche | +/-0.3% |
| Radical error limit current ranges with SFU | - |
| Destruction limit current inputs (electrical current) | max. 40mA |
| Destruction limit current inputs (voltage) | max. 15V |
| Resistance inputs | |
| Resistance ranges | 0 ... 600 Ohm 0 ... 6000 Ohm |
| Operational limit of resistor ranges | +/-0.5% |
| Operational limit of resistor ranges with SFU | - |
| Basic error limit | +/-0.3% |
| Basic error limit with SFU | - |
| Destruction limit resistance inputs | max. 15V |
| Resistance thermometer inputs | |
| Resistance thermometer ranges | Pt100 Ni100 Ni1000 |
| Operational limit of resistance thermometer ranges | +/-1K ... +/-1.2K |
| Operational limit of resistance thermometer ranges with SFU | - |
| Basic error limit thermoresistor ranges | +/-0.8K |
| Basic error limit thermoresistor ranges with SFU | - |
| Destruction limit resistance thermometer inputs | max. 15V |
| Thermocouple inputs | - |
| Thermocouple ranges | - |
| Operational limit of thermocouple ranges | - |
| Operational limit of thermocouple ranges with SFU | - |
| Basic error limit thermoelement ranges | - |
| Basic error limit thermoelement ranges with SFU | - |
| Destruction limit thermocouple inputs | - |
| Programmable temperature compensation | - |
| External temperature compensation | - |
| Internal temperature compensation | - |
| Temperature error internal compensation | - |
| Technical unit of temperature measurement | °C, °F, K |
| Resolution in bit | 13 |
| Measurement principle | Sigma-Delta |
| Basic conversion time | 61 ms/51 ms / channel |
| Noise suppression for frequency | 50 Hz/60 Hz |
| Initial data size | 16 Byte |
Yorum Yap
Adınız:Yorumunuz: Not: HTML'ye dönüştürülmez!
Oylama: Kötü İyi
Doğrulama kodunu giriniz:
