Siemens 6ES7153-1AA03-0XB0 Siemens Simatic ET200M Modül
Ürün Hakkında
- SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES
Ürün Durumu: Sıfır
Ürün hakkında detaylı bilgi almak için müşteri temsilcisi ile görüşünüz.
Teknik veri;
General information |
Vendor identification (VendorID) |
801Dh |
Supply voltage |
Rated value (DC) |
|
● 24 V DC |
Yes |
permissible range, lower limit (DC) |
20.4 V |
permissible range, upper limit (DC) |
28.8 V |
permissible range (ripple included), lower limit (DC) |
20.4 V |
permissible range (ripple included), upper limit (DC) |
28.8 V |
external protection for power supply lines (recommendation) |
not necessary |
Mains buffering |
● Mains/voltage failure stored energy time |
5 ms |
Input current |
Current consumption, max. |
350 mA; at 24 V DC |
Inrush current, typ. |
2.5 A |
I²t |
0.1 A²·s |
Output voltage |
Rated value (DC) |
5 V |
Output current |
for backplane bus (5 V DC), max. |
1 A |
Power loss |
Power loss, typ. |
3 W |
Address area |
Addressing volume |
● Inputs |
128 byte |
● Outputs |
128 byte |
Hardware configuration |
Number of modules per DP slave interface, max. |
8 |
Interfaces |
Interface physics, RS 485 |
Yes |
Interface physics, FOC |
No |
PROFIBUS DP |
● Node addresses |
1 to 125 permitted |
● automatic detection of transmission rate |
Yes |
● Output current, max. |
90 mA |
● Transmission rate, max. |
12 Mbit/s |
● Transmission procedure |
RS 485 |
● SYNC capability |
Yes |
● FREEZE capability |
Yes |
● Direct data exchange (slave-to-slave communication) |
Yes; Sender |
● Connector type |
9-pin sub D socket |
1. Interface |
DP slave |
● GSD file |
(for DPV1) SIEM801D.GSD; SI01801D.GSG |
● automatic baud rate search |
Yes |