SIMATIC DP, POWER MODULE PM-E F PROFISAFE, FOR ET 200S; 24V DC USEABLE FOR INSTALLATIONS WITH UNGROUNDED REFERENCE POTENTIAL RELAIS FOR FAIL-SAFE SWITCHING OF VOLTAGE BUSES P1 AND P2 UP TO CATEGORY 3 (EN954-1)/ SIL2 (IEC61508)/PLD (ISO13849), 2 FAIL-SAFE DIGITAL OUTPUTS UP TO CATEGORY 4 (EN954-1)/ SIL3 (IEC61508)/PLE (ISO13849), ALSO USEABLE IN PROFINET-NETWORKS W. IM151-3 HF
| Supply voltage |
| Load voltage L+ |
| ● Rated value (DC) |
24 V |
| ● Reverse polarity protection |
No |
| Input current |
| From load voltage L+ (no load), typ. |
100 mA |
| from backplane bus 24 V DC, max. |
28 mA |
| Power loss |
| Power loss, typ. |
4 W |
| Address area |
| Occupied address area |
| ● Inputs |
5 byte |
| ● Outputs |
5 byte |
| Digital outputs |
| Number of digital outputs |
2 |
| Short-circuit protection |
Yes; Electronic |
| ● Response threshold, typ. |
Response threshold (short-circuit): 5 to 12 A; response threshold (external short-circuit to ground): 5 to 12 A; response threshold (external short-circuit to P potential): 25 to 45 A |
| Limitation of inductive shutdown voltage to |
L+ (-2x 47 V) |
| Controlling a digital input |
No |
| Switching capacity of the outputs |
| ● on lamp load, max. |
10 W |
| Load resistance range |
| ● lower limit |
12 Ω |
| ● upper limit |
1 kΩ |
| Output voltage |
| ● for signal "1", min. |
L+ (-2,0 V), current sourcing switch: L+ (-1,5 V), voltage drop on current sinking switch: max. 0.5 V |
| Output current |
| ● for signal "1" rated value |
2 A |
| ● for signal "1" permissible range for 0 to 60 °C, min. |
20 mA |
| ● for signal "1" permissible range for 0 to 60 °C, max. |
2.4 A |
| ● for signal "0" residual current, max. |
0.5 mA |
| Parallel switching of two outputs |
| ● for uprating |
No |
| ● for redundant control of a load |
No |
| Switching frequency |
| ● with resistive load, max. |
30 Hz |
| ● with inductive load, max. |
0.1 Hz |
| ● on lamp load, max. |
10 Hz |
| Total current of the outputs (per group) |
| horizontal installation |
| — up to 40 °C, max. |
10 A |
| — up to 55 °C, max. |
7 A |
| — up to 60 °C, max. |
6 A |
| vertical installation |
| — up to 40 °C, max. |
6 A |
| Relay outputs |
| Switching capacity of contacts |
