Siemens 6ES7131-1BH01-0XB0 ET200L, EL-BLOCK, 16DI, DC 24V
Ürün Hakkında
- SIMATIC DP, ELECTRONIC BLOCK FOR ET 200L, 16 DI, 24V DC
Ürün Durumu: -
Ürün hakkında detaylı bilgi almak için müşteri temsilcisi ile görüşünüz.
Teknik veri;
Supply voltage |
Rated value (DC) |
24 V |
Reverse polarity protection |
Yes |
Mains buffering |
● Mains/voltage failure stored energy time |
20 ms |
Load voltage L+ |
● Rated value (DC) |
24 V; 1L+, 2L+, 3L+ |
Input current |
from supply voltage L+, max. |
70 mA; L4+ / L5+ |
from load voltage L+ (without load), max. |
50 mA; Per load group (L1+ or L2+ / L3+) |
Power loss |
Power loss, typ. |
2.2 W |
Hardware configuration |
Rack |
● required terminal block |
TB 16L |
Digital inputs |
Number of digital inputs |
16 |
Input characteristic curve in accordance with IEC 61131, type 1 |
Yes |
Input voltage |
● Rated value (DC) |
24 V |
● for signal "0" |
-30 to +5V |
● for signal "1" |
13 to 30V |
Input current |
● for signal "0", max. (permissible quiescent current) |
1.5 mA |
● for signal "1", typ. |
5 mA |
Input delay (for rated value of input voltage) |
for standard inputs |
— at "0" to "1", min. |
2 ms |
— at "0" to "1", max. |
4.5 ms |
— at "1" to "0", min. |
2 ms |
— at "1" to "0", max. |
4.5 ms |
Cable length |
● shielded, max. |
1 000 m |
● unshielded, max. |
600 m |
Encoder |
Connectable encoders |
● 2-wire sensor |
Yes |
Interfaces |
PROFIBUS DP |
● Transmission rate, max. |
1.5 Mbit/s |
● FREEZE capability |
Yes |
● Direct data exchange (slave-to-slave communication) |
Yes; Transmitter (for digital outputs and hybrid modules ET 200L: not for L-SC or IM-SC) |
Protocols |
Bus protocol/transmission protocol |
PROFIBUS DP |
Interrupts/diagnostics/status information |
Alarms |
No |
Diagnostic functions |
Yes |