6ES7138-4FA04-0AB0 ET200S, EL-MOD., 4/8 F-DI, DC 24V
Ürün Durumu: Kutulu (3)
Ürün Durumu: Kutulusuz (3)
***SPARE PART*** SIMATIC DP, ELECTRON. MODULE F. ET200S, 4/8 F-DI PROFISAFE, 24V DC, 30 MM WIDTH UP TO CATEGORY 4 (EN954-1)/ SIL3 (IEC61508)/PLE (ISO13849), ALSO USEABLE IN PROFINET- NETWORK WITH IM151-3 HF
| Supply voltage |
| Rated value (DC) |
|
| ● 24 V DC |
Yes |
| permissible range, lower limit (DC) |
20.4 V |
| permissible range, upper limit (DC) |
28.8 V |
| Reverse polarity protection |
No |
| Encoder supply |
| Number of outputs |
2 |
| Type of output voltage |
min. L+ (-1.5 V) |
| Short-circuit protection |
Yes; Electronic (response threshold 0.7 A to 1.8 A) |
| Output current |
| ● Rated value |
300 mA |
| ● permissible range |
0 to 300 mA |
| Power loss |
| Power loss, typ. |
4 W |
| Address area |
| Occupied address area |
| ● Inputs |
6 byte |
| ● Outputs |
4 byte |
| Digital inputs |
| Number of digital inputs |
8; 8 single channel, 4 two-channel |
| Input characteristic curve in accordance with IEC 61131, type 1 |
Yes |
| Number of simultaneously controllable inputs |
| ● Number of simultaneously controllable inputs |
8 |
| Input voltage |
| ● Type of input voltage |
DC |
| ● Rated value (DC) |
24 V |
| ● for signal "0" |
-30 to +5V |
| ● for signal "1" |
+15 to +30V |
| Input current |
| ● for signal "1", typ. |
3.7 mA |
| Input delay (for rated value of input voltage) |
| for standard inputs |
| — parameterizable |
Yes |
| — at "0" to "1", min. |
0.3 ms |
| — at "0" to "1", max. |
17 ms |
| — at "1" to "0", min. |
0.3 ms |
| — at "1" to "0", max. |
17 ms |
| Cable length |
| ● shielded, max. |
200 m |
| ● unshielded, max. |
200 m |
| Encoder |
| Connectable encoders |
| ● 2-wire sensor |
No |
| Interrupts/diagnostics/status information |
| Diagnostic functions |
Yes |
