6ES7132-4HB01-0AB0 ET200S, EL-MOD., 2RO. DC24VAC230V,5A,5PC
SIMATIC DP, 5 ELECTRON. MODULES FOR ET 200S, 2 DO RELAY 24V DC - 230V AC/5A,15 MM WIDTH FIRST-UP SIGNAL WITH LED SF (GROUP FAULT), 5 PIECES PER PACKAGING UNIT
| Supply voltage |
| Load voltage L+ |
| ● Rated value (DC) |
24 V; From power module |
| ● Reverse polarity protection |
Yes |
| Input current |
| from load voltage L+ (without load), max. |
30 mA |
| from backplane bus 3.3 V DC, max. |
10 mA |
| Power loss |
| Power loss, typ. |
0.6 W |
| Address area |
| Address space per module |
| ● with packing |
2 bit |
| ● without packing |
1 byte |
| Digital outputs |
| Number of digital outputs |
2 |
| Short-circuit protection |
No |
| Limitation of inductive shutdown voltage to |
No |
| Controlling a digital input |
Yes |
| Output current |
| ● for signal "1" rated value |
5 A |
| ● for signal "1" minimum load current |
8 mA |
| Switching frequency |
| ● with resistive load, max. |
2 Hz |
| ● with inductive load, max. |
0.5 Hz |
| ● on lamp load, max. |
2 Hz |
| Relay outputs |
| Switching capacity of contacts |
| — Thermal continuous current, max. |
5 A |
| Cable length |
| ● shielded, max. |
1 000 m |
| ● unshielded, max. |
600 m |
| Isochronous mode |
| Isochronous operation (application synchronized up to terminal) |
No |
| Interrupts/diagnostics/status information |
| Diagnostic functions |
No |
| Substitute values connectable |
Yes; 0/1 |
| Diagnostics indication LED |
| ● Status indicator digital output (green) |
Yes |
| Parameter |
| Behavior on CPU/Master STOP |
Substitute a value/keep last value |
