6ES7138-4DA04-0AB0 ET200S, EL-MOD., COUNTER 100KHZ, 24V DC
SIMATIC DP, ELECTRONIC MODULE F. ET 200S, 1 COUNT 24V/100KHZ 15 MM WIDE, OPERATION MODES: COUNT, MEASURE, (PERIOD DURATION MEASUREMENT HIGH RESOLUTION) WITH CLOCK CYCLIC SYNCHRON.APP
| Supply voltage |
| Load voltage L+ |
| ● Rated value (DC) |
24 V |
| ● permissible range, lower limit (DC) |
20.4 V |
| ● permissible range, upper limit (DC) |
28.8 V |
| ● Reverse polarity protection |
Yes |
| Input current |
| from load voltage L+ (without load), max. |
42 mA |
| from backplane bus 3.3 V DC, max. |
10 mA |
| Encoder supply |
| 24 V encoder supply |
| ● 24 V |
Yes; L+ (-0.8 V) |
| ● Short-circuit protection |
Yes |
| ● Output current, max. |
500 mA |
| Power loss |
| Power loss, typ. |
1 W |
| Hardware configuration |
| Module exchange |
| ● Module exchange during operation of the IM-DP |
Yes |
| ● Module exchange under process voltage |
Yes |
| Digital inputs |
| Number of digital inputs |
1 |
| Functions |
Gate control, synchronization, latch function |
| Input characteristic curve in accordance with IEC 61131, type 2 |
Yes |
| Input voltage |
| ● Rated value (DC) |
24 V |
| ● for signal "0" |
-30 to +5V |
| ● for signal "1" |
+11 to +30V |
| Input current |
| ● for signal "0", max. (permissible quiescent current) |
2 mA |
| ● for signal "1", typ. |
9 mA |
| Input delay (for rated value of input voltage) |
| for standard inputs |
| — at "0" to "1", max. |
2.5 µs; Filter off: 2.5 µs (200 kHz), filter on: 25 µs (20 kHz) |
| Cable length |
| ● shielded, max. |
100 m; Filter 20 kHz: 100 m, filter 200 kHz: 50 m |
