Siemens 6ES7131-1BH01-0XB0 ET200L, EL-BLOCK, 16DI, DC 24V
Ürün Hakkında
- SIMATIC DP, ELECTRONIC BLOCK FOR ET 200L, 16 DI, 24V DC
Ürün Durumu: -
Ürün hakkında detaylı bilgi almak için müşteri temsilcisi ile görüşünüz.
Teknik veri;
| Supply voltage |
| Rated value (DC) |
24 V |
| Reverse polarity protection |
Yes |
| Mains buffering |
| ● Mains/voltage failure stored energy time |
20 ms |
| Load voltage L+ |
| ● Rated value (DC) |
24 V; 1L+, 2L+, 3L+ |
| Input current |
| from supply voltage L+, max. |
70 mA; L4+ / L5+ |
| from load voltage L+ (without load), max. |
50 mA; Per load group (L1+ or L2+ / L3+) |
| Power loss |
| Power loss, typ. |
2.2 W |
| Hardware configuration |
| Rack |
| ● required terminal block |
TB 16L |
| Digital inputs |
| Number of digital inputs |
16 |
| Input characteristic curve in accordance with IEC 61131, type 1 |
Yes |
| Input voltage |
| ● Rated value (DC) |
24 V |
| ● for signal "0" |
-30 to +5V |
| ● for signal "1" |
13 to 30V |
| Input current |
| ● for signal "0", max. (permissible quiescent current) |
1.5 mA |
| ● for signal "1", typ. |
5 mA |
| Input delay (for rated value of input voltage) |
| for standard inputs |
| — at "0" to "1", min. |
2 ms |
| — at "0" to "1", max. |
4.5 ms |
| — at "1" to "0", min. |
2 ms |
| — at "1" to "0", max. |
4.5 ms |
| Cable length |
| ● shielded, max. |
1 000 m |
| ● unshielded, max. |
600 m |
| Encoder |
| Connectable encoders |
| ● 2-wire sensor |
Yes |
| Interfaces |
| PROFIBUS DP |
| ● Transmission rate, max. |
1.5 Mbit/s |
| ● FREEZE capability |
Yes |
| ● Direct data exchange (slave-to-slave communication) |
Yes; Transmitter (for digital outputs and hybrid modules ET 200L: not for L-SC or IM-SC) |
| Protocols |
| Bus protocol/transmission protocol |
PROFIBUS DP |
| Interrupts/diagnostics/status information |
| Alarms |
No |
| Diagnostic functions |
Yes |
