| Supply voltage |
| Rated value (DC) |
24 V |
| Reverse polarity protection |
Yes |
| Input current |
| from supply voltage L+, max. |
50 mA |
| Power loss |
| Power loss, max. |
1 W |
| Hardware configuration |
| Rack |
| ● required terminal block |
TB 16SC |
| Slots |
| ● required slots |
2; from 8 |
| Analog outputs |
| Number of analog outputs |
1 |
| Current output, no-load voltage, max. |
16 V |
| Output ranges, current |
| ● 0 to 20 mA |
Yes |
| ● 4 mA to 20 mA |
Yes |
| Connection of actuators |
| ● for current output two-wire connection |
Yes |
| Load impedance (in rated range of output) |
| ● with current outputs, max. |
600 Ω; at common-mode voltage 2 V, max. 500 ohms; at common-mode voltage 0 V, max. 600 ohms; idle test |
| ● with current outputs, inductive load, max. |
1 mH |
| Destruction limits against externally applied voltages and currents |
| ● Voltages at the outputs towards MANA |
15 V; max. 15 V continuous; 75 V for max. 1 s (mark to space ratio 1:20) |
| ● Current, max. |
50 mA; DC |
| Cable length |
| ● shielded, max. |
200 m |
| Analog value generation for the outputs |
| Integration and conversion time/resolution per channel |
| ● Resolution (incl. overrange) |
S7 representation: 0 mA to 20 mA, 4 mA to 20 mA; S5 representation: 12 bits, 12 bits |
| ● Resolution with overrange (bit including sign), max. |
12 bit |
| ● Conversion time (per channel) |
5 ms |
| Settling time |
| ● for resistive load |
0.1 ms |
| ● for inductive load |
0.5 ms |
| Errors/accuracies |
| Linearity error (relative to output range), (+/-) |
0.06 % |
| Temperature error (relative to output range), (+/-) |
0.01 %/K |
| Repeat accuracy in steady state at 25 °C (relative to output area), (+/-) |
0.1 % |
| Operational error limit in overall temperature range |
| ● Current, relative to output area, (+/-) |
1 % |
| Basic error limit (operational limit at 25 °C) |
| ● Current, relative to output area, (+/-) |
0.7 % |
| Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency |
| ● Common mode interference (UCM < Vss AC (50 Hz)), min. |
30 dB |
| Interrupts/diagnostics/status information |
