2900299 PLC-RPT- 24DC/21 - Phoenix Contact
Stok Durumu: Sıfır
Marka: Phoenix Contact
Ürün Kodu: 2900299 PLC-RPT- 24DC/21
Stok Miktarı: Stok Sorunuz
Marka: Phoenix Contact
Ürün Kodu: 2900299 PLC-RPT- 24DC/21
Stok Miktarı: Stok Sorunuz
Phoenix Contact 2900299 PLC-RPT- 24DC/21 Röle Modülü
PLC-INTERFACE, Push-in Teknolojili PLC-BPT.../21 taban elemanı ve güç kontağına sahip geçmeli minyatür röleden oluşur, NS 35/7,5 DIN rayına montaj için, 1 PDT, giriş gerilimi: 24 V DC
Ürün hakkında detaylı bilgi almak için müşteri temsilcisi ile görüşünüz.
Teknik veri;
Note
Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |
---|
Dimensions
Width | 6.2 mm |
---|---|
Height | 80 mm |
Depth | 94 mm |
Ambient conditions
Ambient temperature (operation) | -40 °C ... 60 °C |
---|---|
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Coil side
Nominal input voltage UN | 24 V DC |
---|---|
Typical input current at UN | 9 mA |
Typical response time | 5 ms |
Typical release time | 8 ms |
Protective circuit | Reverse polarity protection Polarity protection diode |
Free-wheeling diode Damping diode | |
Operating voltage display | yes |
Power dissipation for nominal condition | 0.22 W |
Contact side
Contact type | 1 PDT |
---|---|
Type of switch contact | Single contact |
Contact material | AgSnO |
Maximum switching voltage | 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...) |
Minimum switching voltage | 5 V (at 100 mA) |
Min. switching current | 10 mA (at 12 V) |
Maximum inrush current | 10 A (4 s) |
Limiting continuous current | 6 A |
Interrupting rating (ohmic load) max. | 140 W (at 24 V DC) |
20 W (at 48 V DC) | |
18 W (at 60 V DC) | |
23 W (at 110 V DC) | |
40 W (at 220 V DC) | |
1500 VA (for 250 V AC) | |
Switching capacity in acc. with DIN VDE 0660/IEC 60947 | 2 A (at 24 V, DC13) |
0.2 A (at 110 V, DC13) | |
0.1 A (at 220 V, DC13) | |
3 A (at 24 V, AC15) | |
3 A (at 120 V, AC15) | |
3 A (at 230 V, AC15) |
Connection data input side
Connection name | Coil side |
---|---|
Connection method | Push-in connection |
Stripping length | 8 mm |
Conductor cross section solid | 0.14 mm² ... 2.5 mm² |
Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
Conductor cross section AWG | 26 ... 14 |
Connection data output side
Connection name | Contact side |
---|---|
Connection method | Push-in connection |
Stripping length | 8 mm |
Conductor cross section solid | 0.14 mm² ... 2.5 mm² |
Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
Conductor cross section AWG | 26 ... 14 |
General
Test voltage relay winding/relay contact | 4 kV AC (50 Hz, 1 min.) |
---|---|
Operating mode | 100% operating factor |
Degree of protection | RT III (Relay) |
Mechanical service life | 2 x 107 cycles |
Flammability rating according to UL 94 | V0 |
Designation | Standards/regulations |
Standards/regulations | IEC 60664 |
IEC 60664A | |
DIN VDE 0110 | |
DIN EN 50178/DIN VDE 0160 (in relevant parts) | |
DIN EN 50178/VDE 0160 | |
IEC 60255/DIN VDE 0435 (in relevant parts) | |
Degree of pollution | 3 |
Overvoltage category | III |
Mounting position | any |
Assembly instructions | In rows with zero spacing |
Standards and Regulations
Connection in acc. with standard | CUL |
---|---|
Designation | Standards/regulations |
Standards/regulations | IEC 60664 |
IEC 60664A | |
DIN VDE 0110 | |
DIN EN 50178/DIN VDE 0160 (in relevant parts) | |
DIN EN 50178/VDE 0160 | |
IEC 60255/DIN VDE 0435 (in relevant parts) | |
Degree of pollution | 3 |
Overvoltage category | III |
Flammability rating according to UL 94 | V0 |
Yorum Yap
Adınız:Yorumunuz: Not: HTML'ye dönüştürülmez!
Oylama: Kötü İyi
Doğrulama kodunu giriniz: