IC-KP2-2HB6-V15B Control interface unit - PEPPERL

IC-KP2-2HB6-V15B Control interface unit - PEPPERL
Ürün Kodu: IC-KP2-2HB6-V15B
Stok Miktarı: Stok Sorunuz
0 yorum  0 yorum  |  Yorum Yap

LED status indicator of bus communication and read/write heads

Max. 2 read/write heads can be connected

Alternatively 1 read/write head and 1 trigger sensor can be connected

Datasheet excerpt: Technical data of IC-KP2-2HB6-V15B

Product Description
Control interface unit IDENTControl Compact
with PROFIBUS DP interface
General specifications
Number of read/write heads max. 2
alternatively 1 read/write head and 1 trigger sensor
UL File Number E87056
Indicators/operating means
LEDs 1, 2 Status indicator for read/write heads
green: command at read/write head active
yellow: approx. 1 second long, if command was successfully executed
LEDs CH1, CH2 green: read head detected
red: Configuration error
LED PWR/ERR green: power on
red: Hardware fault
Rotary switch Address setting 00 ... 7E, FF (hexadecimal)
BUS Address (high nibble): 0 ... 7, F
BUS Address (low nibble): 0 ... F
Electrical specifications
Rated operating voltage 20 ... 30 V DC , PELV
Ripple ≤ 10 % at 30 V DC
Current consumption ≤ 4 A incl. read/write heads
Power consumption 2 W Without read/write heads
Electrical isolation basic insulation acc. to DIN EN 50178, rated insulation voltage of 50 Veff
Interface 1
Interface type PROFIBUS
Physical RS-485
Protocol PROFIBUS DP acc. to EN 50170
Interface 2
Interface type Diagnostic Interface
Physical RS 232
Protocol ASCII
Transfer rate 38.4 kBit/s
Compliance with standards and directives
Directive conformity  
  EMC Directive 2004/108/EC EN 61000-6-2:2006, EN 61000-6-4:2007
Standard conformity  
  Degree of protection IEC 60529:2001
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Storage temperature -40 ... 85 °C (-40 ... 185 °F)
Climatic conditions air humidity max. 96 % 
Salt spray resistant to EN 60068-2-52
Shock and impact resistance Oscillation (Sine): 5 g, 10 - 1000 Hz to EN 60068-2-6
Shock (Half-sine): 30 g, 11 ms in accordance with EN 60068-2-27
Mechanical specifications
Degree of protection IP67
Connection Read/write heads: shielded, 4-pin, M12 connector 
Power supply: M12 connector 
Protective earth: M4 earthing screw 
Diagnostic RS 232: M12 connector 
PROFIBUS: M12 connector, B-coded
Material  
  Housing Powder coated zinc
Installation screw fixing
Mass approx. 500 g

Yorum Yap

Adınız:


Yorumunuz: Not: HTML'ye dönüştürülmez!

Oylama: Kötü           İyi

Doğrulama kodunu giriniz:



IC-KP2-2HB6-V15B Control interface unit - PEPPERL
Hover | Large
IC-KP2-2HB6-V15B Control interface unit - PEPPERL