Siemens 6ES7153-1AA03-0XB0 Siemens Simatic ET200M Modül
Ürün Hakkında
- SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES
Ürün Durumu: Sıfır
Ürün hakkında detaylı bilgi almak için müşteri temsilcisi ile görüşünüz.
Teknik veri;
| General information |
| Vendor identification (VendorID) |
801Dh |
| Supply voltage |
| Rated value (DC) |
|
| ● 24 V DC |
Yes |
| permissible range, lower limit (DC) |
20.4 V |
| permissible range, upper limit (DC) |
28.8 V |
| permissible range (ripple included), lower limit (DC) |
20.4 V |
| permissible range (ripple included), upper limit (DC) |
28.8 V |
| external protection for power supply lines (recommendation) |
not necessary |
| Mains buffering |
| ● Mains/voltage failure stored energy time |
5 ms |
| Input current |
| Current consumption, max. |
350 mA; at 24 V DC |
| Inrush current, typ. |
2.5 A |
| I²t |
0.1 A²·s |
| Output voltage |
| Rated value (DC) |
5 V |
| Output current |
| for backplane bus (5 V DC), max. |
1 A |
| Power loss |
| Power loss, typ. |
3 W |
| Address area |
| Addressing volume |
| ● Inputs |
128 byte |
| ● Outputs |
128 byte |
| Hardware configuration |
| Number of modules per DP slave interface, max. |
8 |
| Interfaces |
| Interface physics, RS 485 |
Yes |
| Interface physics, FOC |
No |
| PROFIBUS DP |
| ● Node addresses |
1 to 125 permitted |
| ● automatic detection of transmission rate |
Yes |
| ● Output current, max. |
90 mA |
| ● Transmission rate, max. |
12 Mbit/s |
| ● Transmission procedure |
RS 485 |
| ● SYNC capability |
Yes |
| ● FREEZE capability |
Yes |
| ● Direct data exchange (slave-to-slave communication) |
Yes; Sender |
| ● Connector type |
9-pin sub D socket |
| 1. Interface |
| DP slave |
| ● GSD file |
(for DPV1) SIEM801D.GSD; SI01801D.GSG |
| ● automatic baud rate search |
Yes |
