7ML5726-1MD32-2BA4 - Siemens

7ML5726-1MD32-2BA4 - Siemens

SITRANS LPS200

Technical specifications
Mode of operation
Measuring principle Rotating point level switch
Input
Measured variable High and low and demand
Output
Output signal
• Alarm output Microswitch 5 A at 250 V AC, non
inductive
Microswitch SPDT contact 4 A at
30 V DC, non-inductive
• Pickup delay Standard (1 rpm model): approx
1.3 seconds
Optional process applications (5
rpm model): approx. 0.26 seconds
Sensitivity Adjustable via reset force of
spring or geometry of measuring
vane
Rated operating conditions
Installation conditions
• Location Indoor/outdoor
Ambient conditions
• Ambient temperature -20 to +60 °C (-4 to +140 °F)
• Installation catagory III
• Pollution degree 2
Medium conditions Bulk solids
• Temperature
- Standard -20 to +80 °C (-4 to +176 °F)
- Optional -20 to +350 °C (-4 to +662 °F)
• Pressure (vessel)
- Standard Max. 0.5 bar (7.25 psi)
- Optional Max. 10 bar (145 psi)
• Minimum material density
- Standard measuring vane • Can detect down to 100 g/l
(6.25 lb/ft3)
- Optional measuring vane • Can detect down to15 g/l
(2.19 lb/ft3)
Design
• Material
- Enclosure Epoxy coated aluminum
- Process connection, measuring
shaft and vane
Stainless steel or aluminum
• Process connection Thread NPT, BSP and flange
options
• Degree of protection IP65/Type 4/NEMA 4
• Conduit entry 2 x M20x1.5 or 2 x ½" NPT
Power supply
• Jumper selectable • 115 V AC, ± 15%, 50 to 60 Hz,
4 VA or 230 V AC, ± 15%, 50 Hz,
6 VA, or 48 V AC, or 24 V AC
• or 24 V DC, ± 15%, 2.5 W

Yorum Yap

Adınız:


Yorumunuz: Not: HTML'ye dönüştürülmez!

Oylama: Kötü           İyi

Doğrulama kodunu giriniz: