6ES7131-4BF00-0AA0 ET200S, ELEKTRONIKMODULE, 8DI DC 24V
SIMATIC DP, 1 ELECTR. MODULE FOR ET 200S, 8 DI DC 24V 15 MM WIDTH, 1 PIECE PER PACKAGING UNIT
| Supply voltage |
| Rated value (DC) |
|
| ● 24 V DC |
Yes |
| permissible range, lower limit (DC) |
20.4 V |
| permissible range, upper limit (DC) |
28.8 V |
| Reverse polarity protection |
Yes |
| Input current |
| from supply voltage L+, max. |
Dependent on encoder |
| from backplane bus 3.3 V DC, max. |
10 mA |
| Encoder supply |
| Number of outputs |
0; no encoder supply |
| Power loss |
| Power loss, typ. |
1.2 W |
| Address area |
| Address space per module |
| ● without packing |
1 byte |
| Digital inputs |
| Number of digital inputs |
8 |
| Input characteristic curve in accordance with IEC 61131, type 1 |
Yes; 2-wire sensors connectable |
| Number of simultaneously controllable inputs |
| ● Number of simultaneously controllable inputs |
8 |
| Input voltage |
| ● Type of input voltage |
DC |
| ● Rated value (DC) |
24 V |
| ● for signal "0" |
-30 to +5V |
| ● for signal "1" |
+15 to +30V |
| Input current |
| ● for signal "1", typ. |
5 mA |
| Input delay (for rated value of input voltage) |
| for standard inputs |
| — parameterizable |
No |
| — at "0" to "1", min. |
2 ms |
| — at "0" to "1", max. |
4.5 ms |
| — at "1" to "0", min. |
2 ms |
| — at "1" to "0", max. |
4.5 ms |
| Cable length |
| ● shielded, max. |
1 000 m |
| ● unshielded, max. |
600 m |
